Inorganic Functional Materials

Publications

2020     2019     2018     2017     2016     2015     2014     2013     2012    2011     2010    2009    

2008     2007     2006     2005     2004     2003     2002     until 2001

2020

  • Bumke, L.; Zamponi, C.; Jetter, J.; Quandt, E. (2020). Cu-rich Ti52.8 Ni22.2 Cu22.5 Co2.5 shape memory alloy films with ultra-low fatigue for elastocaloric applications. Journal of Applied Physics, 127(22), 225105. doi: 10.1063/5.0006301
  • Curtis, S. M.; Wolff, N.; Dengiz, D.; Lewitz, H.; Jetter, J.; Bumke, L.; Hayes, P.; Yarar, E.; Thormählen, L.; Kienle, L.; Meyners, D.; Quandt, E. (2020). Integration of AlN piezoelectric thin films on ultralow fatigue TiNiCu shape memory alloys. Journal of Materials Research, 35(10), 1298–1306. doi: 10.1557/jmr.2020.106
  • Chluba, C.; Siemsen, K.; Bechtold, C.; Zamponi, C.; Selhuber-Unkel, C.; Quandt, E.; Lima de Miranda, R. (2020). Microfabricated bioelectrodes on self-expandable NiTi thin film devices for implants and diagnostic instruments. Biosensors and Bioelectronics, 153, 112034. doi: 10.1016/j.bios.2020.112034
  • Gugat, J. L.; Bechtold, C.; Chluba, C.; Quandt, E.; de Miranda, R. L. (2020). High-Cycle Mechanical Fatigue Performance of Sputtered Nitinol. Journal of Materials Engineering and Performance, 29(3), 1892–1900. doi: 10.1007/s11665-020-04668-2
  • Rastjoo, S.; Fechner, R.; Bumke, L.; Kötz, M.; Quandt, E.; Kohl, M.: Development and co-integration of a SMA/Si bimorph nanoactuator for Si photonic circuits, Microelectronic Engineering 225 (2020), 111257, doi: 10.1016/j.mee.2020.111257
  • Wegner, M.; Gu, H.; James, R. D.; Quandt, E. (2020). Correlation between phase compatibility and efficient energy conversion in Zr-doped Barium Titanate. Scientific Reports, 10(1), 3496. doi: 10.1038/s41598-020-60335-5
  • Schell, V., Müller, C.; Durdaut, P.; Kittmann, A.; Thormählen, L.; Lofink, F.; Meyners, D.; Höft, M.; McCord, J.; Quandt, E.: Magnetic anisotropy controlled FeCoSiB thin films for surface acoustic wave magnetic field sensors, Appl. Phys. Lett. 116 (2020), 073503, doi: 10.1063/1.5140562.
  • Urs, N. O.; Golubeva, E.; Röbisch, V.; Toxvaerd, S.; Deldar, S.; Knöchel, R.; Höft, M.; Quandt, E.; Meyners, D.; McCord, J. (2020). Direct Link between Specific Magnetic Domain Activities and Magnetic Noise in Modulated Magnetoelectric Sensors. Physical Review Applied, 13(2), 024018. doi: 10.1103/PhysRevApplied.13.024018

2019

  • Pop-Ghe, P.; Stock, N.; Quandt, E. (2019). Suppression of abnormal grain growth in K0.5Na0.5NbO3: phase transitions and compatibility. Scientific Reports, 9(1), 19775. doi: 10.1038/s41598-019-56389-9
  • Spetzler, B.; Kirchhof, C.; Quandt, E.; McCord, J.; Faupel, F. (2019). Magnetic Sensitivity of Bending-Mode Delta-E-Effect Sensors. Physical Review Applied, 12(6), 064036. doi: 10.1103/PhysRevApplied.12.064036
  • Hayes, P.; Jovičević Klug, M.; Toxværd, S.; Durdaut, P.; Schell, V.; Teplyuk, A.; Burdin, D.; Winkler, A.; Weser, R.; Fetisov, Y.; Höft, M.; Knöchel, R.; McCord, J.; Quandt, E. (2019). Converse Magnetoelectric Composite Resonator for Sensing Small Magnetic Fields. Scientific Reports, 9(1), 16355. doi: 10.1038/s41598-019-52657-w
  • Yarar, E.; Fichtner, S.; Hayes, P.; Piorra, A.; Reimer, T.; Lisec, T.; Frank, P.; Wagner, B.; Lofink, F.; Meyners, D.; Quandt, E. (2019). MEMS-Based AlScN Resonating Energy Harvester With Solidified Powder Magnet. Journal of Microelectromechanical Systems, 1–13. doi: 10.1109/JMEMS.2019.2945550
  • Spetzler, B.; Kirchhof, C.; Reermann, J.; Durdaut, P.; Höft, M.; Schmidt, G.; Quandt, E.; Faupel, F. (2019). Influence of the quality factor on the signal to noise ratio of magnetoelectric sensors based on the delta-E effect. Applied Physics Letters, 114(18), 183504. doi: 10.1063/1.5096001
  • Velvaluri, P.; Pravdivtseva, M. S.; Lima de Miranda, R.; Hövener, J. B.; Jansen, O.; Quandt, E. (2019). Design Characterization of Thin Film Flow Diverter Stents (FDS) Based on SMA’s: FEA, CFD and MRI Study. Shape Memory and Superelasticity, 5(3), 195–205. doi: 10.1007/s40830-019-00223-8
  • Bechtold, C.; Chluba, C.; Zamponi, C.; Quandt, E., de Miranda, R. L. (2019). Fabrication and Characterization of Freestanding NiTi Based Thin Film Materials for Shape Memory Micro-actuator Applications. Shape Memory and Superelasticity. doi: 10.1007/s40830-019-00239-0
  • Jessen, L. K.; Zamponi, C.; Willumeit-Römer, R.; Quandt, E. (2019). Magnetron sputtered freestanding MgAg films with ultra-low corrosion rate. Acta Biomaterialia. doi: 10.1016/j.actbio.2019.05.060
  • Labrenz, J.; Bahr, A.; Durdaut, P.; Hoft, M.; Kittmann, A.; Schell, V.; Quandt, E. (2019). Frequency Response of SAW Delay Line Magnetic Field/Current Sensor. IEEE Sensors Letters, 1–1. doi: 10.1109/LSENS.2019.2943129
  • Jessen, L.; Zamponi, C.; Quandt, E.: Mechanical Properties of Magnetron Sputtered Free Standing Mg-Ag Alloy Films, Frontiers in Materials 6 (2019), 236, doi: 10.3389/fmats.2019.00236.
  • Jetter, J.; Gu, H.; Zhang, H.; Wuttig, M.; Chen, X.; Greer, J. R.; James, R. D.; Quandt, E. (2019). Tuning crystallographic compatibility to enhance shape memory in ceramics. Physical Review Materials, 3(9), 093603. doi: 10.1103/PhysRevMaterials.3.093603
  • Zhang, C.; Song, Y.; Wegner, M.; Quandt, E.; Chen, X. (2019). Power-Source-Free Analysis of Pyroelectric Energy Conversion. Physical Review Applied, 12(1), 014063. doi: 10.1103/PhysRevApplied.12.014063
  • Seemann, K.; Beirle, S.; Thede, C.; Schier, V.; Quandt, E. (2019). Contactless monitoring of temperature change in cutting inserts by application of hard coatings and ferromagnetic film sensor phases. Sensors and Actuators A: Physical, 296, 278–285. doi: 10.1016/j.sna.2019.07.026
  • Tu, C.; Chu, Z.-Q.; Spetzler, B.; Hayes, P.; Dong, C.-Z.; Liang, X.-F.; Chen, H.-H.; He, Y.-F.; Lisenkov, I.; Lin, H.; Lin, Y.-H.; McCord, J.; Faupel, F.; Quandt, E.; Sun, N.-X. (2019). Mechanical-Resonance-Enhanced Thin-Film Magnetoelectric Heterostructures for Magnetometers, Mechanical Antennas, Tunable RF Inductors, and Filters. Materials, 12(14), 2259. doi: 10.3390/ma12142259
  • Piorra, A.; Hrkac, V.; Wolff, N.; Zamponi, C.; Duppel, V.; Hadermann, J.; Kienle, L.; Quandt, E. (2019). (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 thin films prepared by PLD: Relaxor properties and complex microstructure. Journal of Applied Physics, 125(24), 244103. doi: 10.1063/1.5063428
  • Kumar, P.; Kishore, R. A.; Maurya, D.; Stewart, C. J.; Mirzaeifar, R.; Quandt, E.; Priya, S. (2019). Shape memory alloy engine for high efficiency low-temperature gradient thermal to electrical conversion. Applied Energy, 251, 113277. doi: 10.1016/j.apenergy.2019.05.080
  • Winterfeld, H.; Thormählen, L.; Lewitz, H.; Yarar, E.; Birkoben, T.; Niethe, N.; Preinl, N.; Hanssen, H.; Quandt E.; Kohlstedt, H. (2019). A stress sensor based on a silicon field effect transistor comprising a piezoelectric AlN gate dielectric. Journal of Materials Science: Materials in Electronics, 30(12), 11493–11498. doi: 10.1007/s10854-019-01502-x
  • Vahl, A.; Dittmann, J.; Jetter, J.; Veziroglu, S.; Shree, S.; Ababii, N.; Lupan, O.; Aktas, O.C.; Strunskus, T.; Quandt, E.; Adelung, R.; Sharma, S.K.; Faupel, F. (2019). The impact of O2/Ar ratio on morphology and functional properties in reactive sputtering of metal oxide thin films. Nanotechnology, 30(23), 235603. doi: 10.1088/1361-6528/ab0837
  • Durdaut, P.; Kittmann, A.; Rubiola, E.; Friedt, J.-M.; Quandt, E.; Knochel, R.; Hoft, M. (2019). Noise Analysis and Comparison of Phase-and Frequency-Detecting Readout Systems: Application to SAW Delay Line Magnetic Field Sensor. IEEE Sensors Journal, 1–1. doi: 10.1109/JSEN.2019.2914965
  • Jovičević Klug, M.; Thormählen, L.; Röbisch, V.; Toxværd, S. D.; Höft, M.; Knöchel, R.; Quandt, E.; Meyners, D.; McCord, J. (2019). Antiparallel exchange biased multilayers for low magnetic noise magnetic field sensors. Applied Physics Letters, 114(19), 192410. doi: 10.1063/1.5092942
  • Friedrich, R.-M.; Zabel, S.; Galka, A.; Lukat, N.; Wagner, J.-M.; Kirchhof, C.; Quandt, E.; McCord, J.; Selhuber-Unkel, C.; Siniatchkin, M.; Faupel, F. (2019). Magnetic particle mapping using magnetoelectric sensors as an imaging modality. Scientific Reports, 9(1), 2086. doi: 10.1038/s41598-018-38451-0

2018

  • Röbisch, V.; Piorra, A.; Lima de Miranda, R.; Quandt, E.; Meyners, D. (2018). Frequency-tunable nickel-titanium substrates for magnetoelectric sensors. AIP Advances, 8(12), 125320. doi: 10.1063/1.5066076
  • Viehland, D.; Wuttig, M.; McCord, J.; Quandt, E. (2018). Magnetoelectric magnetic field sensors. MRS Bulletin, 43(11), 834–840. doi: 10.1557/mrs.2018.261
  • Larsen, N.; Oberbeck, K.; Lima de Miranda, R.; Trentmann, J.; Madjidyar, J.; Quandt, E.; Jansen, O. (2018). Comparison of Efficacy, Embolism Rate and Safety of Thrombectomy with Stent Retrievers in an Anterior Circulation Stroke Model. RöFo - Fortschritte Auf Dem Gebiet Der Röntgenstrahlen Und Der Bildgebenden Verfahren, 190(11), 1053–1058. doi: 10.1055/a-0631-4118
  • Hayes, P.; Schell, V.; Salzer, S.; Burdin, D.; Yarar, E.; Piorra, A.; Knöchel, R.; Fetisov, Y. K.; Quandt, E. (2018). Electrically modulated magnetoelectric AlN/FeCoSiB film composites for DC magnetic field sensing. Journal of Physics D: Applied Physics, 51(35), 354002. doi: 10.1088/1361-6463/aad456
  • Gao, W.; Brennan, R.; Hu, Y.; Wuttig, M.; Yuan, G.; Quandt, E.; Ren, S. (2018). Energy transduction ferroic materials. Materials Today, 21(7), 771–784. doi: 10.1016/j.mattod.2018.01.032
  • Dohmeier, N.; Tavassolizadeh, A.; Rott, K.; Quandt, E.; Meyners, D.; Reiss, G. (2018). Inverse magnetostrictive stress sensors based on crossed pinned CoFeB/MgO/CoFeB tunnel junctions. Journal of Applied Physics, 124(6), 064501. doi: 10.1063/1.5040040
  • Bruederlin, F.; Bumke, L.; Chluba, C.; Ossmer, H.; Quandt, E.; Kohl, M. (2018). Elastocaloric Cooling on the Miniature Scale: A Review on Materials and Device Engineering. Energy Technology, 6(8), 1588–1604. doi: 10.1002/ente.201800137
  • Fetisov, Y. K.; Burdin, D. A.; Ekonomov, N. A.; Fetisov, L. Y.; Berzin, A. A.; Hayes, P.; Quandt, E. (2018). Bistability in a multiferroic composite resonator. Applied Physics Letters, 113(2), 022903. doi: 10.1063/1.5032182
  • Durdaut, P.; Kittmann, A.; Bahr, A.; Quandt, E.; Knochel, R.; Hoft, M. (2018). Oscillator Phase Noise Suppression in Surface Acoustic Wave Sensor Systems. IEEE Sensors Journal, 18(12), 4975–4980. doi: 10.1109/JSEN.2018.2832289
  • Frenzel, J.; Eggeler, G.; Quandt, E.; Seelecke, S.; Kohl, M. (2018). High-performance elastocaloric materials for the engineering of bulk- and micro-cooling devices. MRS Bulletin, 43(04), 280–284. doi: 10.1557/mrs.2018.67
  • Jurgeleit, T.; Jessen, L. K.; Quandt, E.; Zamponi, C. (2018). Magnetron-Sputtered, Biodegradable FeMn Foils: The Influence of Manganese Content on Microstructure, Mechanical, Corrosion, and Magnetic Properties. Materials, 11(4), 482. doi: 10.3390/ma11040482
  • Gu, H.; Bumke, L.; Chluba, C.; Quandt, E.; James, R. D. (2018). Phase engineering and supercompatibility of shape memory alloys. Materials Today, 21(3), 265–277. doi: 10.1016/j.mattod.2017.10.002
  • Reermann, J.; Durdaut, P.; Salzer, S.; Demming, T.; Piorra, A.; Quandt, E.; Frey, N.; Höft, M.; Schmidt, G. (2018). Evaluation of magnetoelectric sensor systems for cardiological applications. Measurement, 116, 230–238. doi: 10.1016/j.measurement.2017.09.047
  • Bumke, L.; Chluba, C.; Ossmer, H.; Zamponi, C.; Kohl, M.; Quandt, E. (2018). Cobalt Gradient Evolution in Sputtered TiNiCuCo Films for Elastocaloric Cooling. Physica Status Solidi (B), 255(2), 1700299. doi: 10.1002/pssb.201700299
  • Kittmann, A.; Durdaut, P.; Zabel, S.; Reermann, J.; Schmalz, J.; Spetzler, B.; Meyners, D.; Sun, N. X.; McCord, J.; Gerken, M.; Schmidt, G.; Höft, M.; Knöchel, R.; Faupel, F.; Quandt, E. (2018). Wide Band Low Noise Love Wave Magnetic Field Sensor System. Scientific Reports, 8(1), 278. doi: 10.1038/s41598-017-18441-4
  • Welsch, F.; Ullrich, J.; Ossmer, H.; Schmidt, M.; Kohl, M.; Chluba, C.; Quandt, E.; Schütze, A.; Seelecke, S. (2018). Numerical simulation and experimental investigation of the elastocaloric cooling effect in sputter-deposited TiNiCuCo thin films. Continuum Mechanics and Thermodynamics, 30(1), 53–68. doi: 10.1007/s00161-017-0582-x

 

2017

  • Durdaut, P.; Penner, V.; Kirchhof, C.; Quandt, E.; Knochel, R.; Höft, M. (2017). Noise of a JFET Charge Amplifier for Piezoelectric Sensors. IEEE Sensors Journal, 17(22), 7364–7371. doi: 10.1109/JSEN.2017.2759000
  • Schürmann, U.; Chluba, C.; Wolff, N.; Smazna, D.; Lima de Miranda, R.; Junker, P.; Adelung, R.; Quandt, E.; Kienle, L. (2017). Functional NiTi grids for in situ straining in the TEM. Ultramicroscopy, 182, 10–16. doi: 10.1016/j.ultramic.2017.06.003
  • Jurgeleit, T.; Quandt, E.; Zamponi, C. (2017). Magnetron Sputtering as a Fabrication Method for a Biodegradable Fe32Mn Alloy. Materials, 10(10), 1196. doi: 10.3390/ma10101196
  • Wendler, F.; Ossmer, H.; Chluba, C.; Quandt, E.; Kohl, M. (2017). Mesoscale simulation of elastocaloric cooling in SMA films. Acta Materialia, 136, 105–117. doi: 10.1016/j.actamat.2017.06.044
  • Röbisch, V.; Salzer, S.; Urs, N. O.; Reermann, J.; Yarar, E.; Piorra, A.; Kirchhof, C.; Lage, E.; Höft, M.; Schmidt, G.; Knöchel, R.; McCord, J.; Quandt, E.; Meyners, D. (2017). Pushing the detection limit of thin film magnetoelectric heterostructures. Journal of Materials Research, 32(6), 1009–1019. doi: 10.1557/jmr.2017.58
  • Durdaut, P.; Reermann, J.; Zabel, S.; Kirchhof, C.; Quandt, E.; Faupel, F.; Schmidt, G.; Knochel, R.; Hoft, M.: Modeling and Analysis of Noise Sources for Thin-Film Magnetoelectric Sensors Based on the Delta-E Effect. IEEE Transactions on Instrumentation and Measurement (2017), 66(10), 2771–2779; doi: 10.1109/TIM.2017.2709478.
  • Durdaut, P.; Salzer, S.; Reermann, J.; Röbisch, V.; Hayes, P.; Piorra, A.; Meyners, D.; Quandt, E.; Schmidt, G.; Knöchel, R.; Höft, M.: Thermal-Mechanical Noise in Resonant Thin-Film Magnetoelectric Sensors, IEEE Sensors Journal, vol. 17, no. 8, pp. 2338-2348, April 2017; doi: 10.1109/JSEN.2017.2671442.
  • Zaatreh, S.; Haffner, D.; Strauß, M.; Wegner, K.; Warkentin, M.; Lurtz, C.; Zamponi, C.; Mittelmeier, W.; Kreikemeyer, B.; Willumeit-Römer, R.; Quandt, E.: Bader, R.: Fast corroding, thin magnesium coating displays antibacterial effects and low cytotoxicity, Biofouling (2017), Pages 1-12, Accepted 03 Mar 2017.

 

Zum Seitenanfang

2016

  • Bechtold, C.; Lima de Miranda, R.; Chluba, C.; Zamponi, C.; Quandt, E.: Method for Fabricating Miniaturized NiTi Self-Expandable Thin Film Devices with Increased Radiopacity, Shape Memory and Superelasticity, (2016) 2:391–398
    DOI 10.1007/s40830-016-0086-8
  • Yarar, E.; Salzer, S.; V. Hrkac, V.; Piorra A.; Höft, M.; Knöchel, R.; Kienle, L.; Quandt, E.: Inverse bilayer magnetoelectric thin film sensor, Applied Physics Letters 109, 022901 (2016); doi: 10.1063/1.4958728.
  • Jurgeleit, T.; Quandt, E; Zamponi, C.: Mechanical Properties and In Vitro Degradation of Sputtered Biodegradable Fe-Au Foils, MDPI (2016), Materials 2016, 9(11), 928; doi:10.3390/ma9110928.
  • Bechtold, C.; Lima de Miranda, R.; Chluba, C.; Quandt, E.: Fabrication of self-expandable NiTi thin film devices with micro-electrode array for bioelectric sensing, stimulation and ablation, Biomed Microdevices (2016) 18: 106. doi: 10.1007/s10544-016-0131-6.
  • Tavassolizadeh, A.; Rott, K.; Meier, T.; Quandt, E.; Hölscher H.; Reiss, G.; Meyners, D.: Tunnel Magnetoresistance Sensors with Magnetostrictive Electrodes: Strain Sensors, Sensors 2016, 16, 1902; doi:10.3390/s16111902.
  • Wohlschlögel, M.; Lima de Miranda, R.; Schüßler, A.; Quandt, E.: Nitinol: Tubing Versus Sputtered Film–Microcleanliness and Corrosion Behavior, J. Biomedical Mat. Res. B 104 (2016), 1176-1181.
  • Yarar, E.; Hrkac, V.; Zamponi, C.; Piorra, A.; Kienle, L.; Quandt, E.: Low temperature aluminum nitride thin films for sensory applications, AIP Advances 6 (2016), 075115.
  • Reermann, J.; Zabel, S.; Kirchhof, C.; Quandt, E.; Faupel, F.; Schmidt, G.; Adaptive Readout Schemes for Thin-Film Magnetoelectric Sensors Based on the delta-E Effect, IEEE Sensors Journal 16 (2016), 4891-4900.
  • Zabel, S.; Reermann, J.; Fichtner, S.; Kirchhof, C.; Quandt, E.; Wagner, B.; Schmidt, G.; Faupel, F.: Multimode delta-E effect magnetic field sensors with adapted electrodes, Appl. Phys. Lett. 108 (2016), 222401. 
  • Hayes, P.; Salzer, S.; Reermann, J.; Yarar, E.; Röbisch, V.; Piorra, A.; Meyners, D.; Höft, M.; Knöchel, R.; Schmidt, G.; Quandt, E.: Electrically modulated magnetoelectric sensors, Appl. Phys. Lett. 108 (2016), 182902.
  • Frömter, R.; Kloodt, F.; Rößler, S.; Frauen, A.; Staeck, P.; Cavicchia, D.R.; Bocklage, L.; Röbisch, V.; Quandt, E.; Oepen, H.P.: Time-resolved scanning electron microscopy with polarization analysis, Appl. Phys. Lett. 108 (2016), 142401.
  • Salzer, S.; Jahns, R.; Piorra, A.; Teliban, J.; Reermann, J.; Höft, M.; Quandt, E., Knöchel, R.: Tuning fork for noise suppression in magnetoelectric sensors, Sensors and Actuators A 237 (2016), 91–95.
  • Cluba, C.; Ge, W.; Dankwort, T.; Bechtold, C.; Lima de Miranda, R.; Kienle, L.; Wuttig, M. and Quandt, E.: Effect of crystallographic compatibility and grain size on the functional fatigue of sputtered TiNiCuCo thin films, Phil. Trans. R. Soc. A 374 (2016), 20150311, http://dx.doi.org/10.1098/rsta.2015.0311.
  • Dankwort, T.; Strobel, J.; Chluba, Ch.; Ge, W.; Duppel, V.; Wuttig, M.; Quandt, E., Kienle, L.: Martensite adaption through epitaxial nano transition layers in TiNiCu shape memory alloys, J. Appl. Cryst. 49 (2016), 1009-1015.
  • Urs, N.O.; Mozooni, B.; Mazalski, P.; Kustov, M.; Hayes, P.; Deldar, S.; Quandt, E.; McCord, J.: Advanced magneto-optical microscopy: Imaging from picoseconds to centimeters – imaging spin waves and temperature distributions, AIP Advances 6 (2016), doi: 10.1063/1.4943760.
  • Mishra, Y.; Gröttrup, J.; Kaps, S.; Carstensen, J.; Smazna, J.; Piorra, A.; Kirchhof, C.; Quandt, E.; Adelung, R.: Piezotronic based magnetoelectric sensor: Fabrication and response, Physica Status Solidi A (2016), 2208–2215, doi: 10.1002/pssa.201532924.
  • Ossmer, H.; Chluba, C.; Kauffmann-Weiss, S.; Quandt, E.; Kohl, M.: TiNi-based films for elastocaloric microcooling-Fatigue life and device performance, APL Materials 4 (2016), 064102.
  • Loger, K.; Engel, A.; Haupt, J.; Lima de Miranda, R.; Lutter, G.; Quandt, E.: Microstructured Nickel-Titanium Thin Film Leaflets for Hybrid Tissue Engineered Heart Valves Fabricated by Magnetron Sputter Deposition, Cardiovasc Eng. Technol. (2016), DOI 10.1007/s13239-015 0254-6.
  • Seemann, K.; Leiste, H.; Stüber, M.; Krüger, K.; Brunken, H.; Ludwig, A.; Thede, C.; Quandt, E.:Combining Sensor and Protective Functionalities in Ferromagnetic Nanocomposite Thin Films for Applications in Harsh Environments, Advanced Engineering Materials (2016), DOI: 10.1002/adem.201500474.
  • Loger, K.; Engel, A.; Haupt, J.; Li, Q.;Lamprecht, C.; Lima de Miranda, R.; Quandt, E.; Lutter, G.; Selhuber-Unkel,C.: Cell adhesion on NiTi thin film sputter deposited meshes, Materials Science and Engineering C (2016), 59:611-616.

Zum Seitenanfang

2015

  • Haffner, D.; Zamponi, C.; Lima de Miranda, R.; Quandt, E.: Micropatterned freestanding magnetron sputtered Mg-alloy scaffolds, BioNanoMat 16 (2015), 19-22.
  • Reermann, J.; Schmidt, G. ; Teliban, I. ; Salzer, S. ; Hoft, M. ; Knöchel, R. ; Piorra, A. ; Quandt, E.: Adaptive Acoustic Noise Cancellation for Magnetoelectric Sensors, IEEE Sensors Journal 15, (2015), 5804 – 5812.
  • Bechtold, C.; Lima de Miranda, R.; Quandt, E.: Capability of Sputtered Micro-patterned NiTi Thick Films, Shap. Mem.Superelasticity (2015), DOI 10.1007/s40830-015-0029-9.
  • Zabel, S.; Kirchhof, C.; Yarar, E.; Meyners, D.; Quandt, E.; F. Faupel: Phase modulated magnetoelectric delta-E effect sensor for subnano tesla magnetic fields, Appl. Phys. Lett. 107 (2015), 152402.
  • Röbisch, V.; Yarar, E.; Urs, N.O.; Teliban, J.; Knöchel R.; McCord, J.; Quandt, E.; D. Meyners: Exchange biased magnetoelectric composites for magnetic field sensor application by frequency conversion, Appl. Phys. Lett. 117 (2015), 17B513, DOI: 10.1063/1.4913814.
  • Tavassolizadeh, A.; Hayes, P.; Rott, K.; Reiss, G.; Quandt, E.; Meyners, D.: Highly strain-sensitive magnetostrictive tunnel magnetoresistance junctions, Journal of Magnetism and Magnetic Materials 384 (2015), 308-313.
  • Chluba, C.; Ge, W.; Lima de Miranda, R.; Strobel, J.; Kienle, L.; Quandt, E.; Wuttig, M.: Ultralow-fatigue shape memory alloy films, Science, 348 (2015), 1004-1007.
  • Wohlschlögel, M.; Lima de Miranda, R.; Schüßler,A.; Quandt, E.: Nitinol: Tubing Versus Sputtered Film–Microcleanliness and Corrosion Behavior, Society for Biomaterials (2015), DOI: 10.1002/jbm.b.33449, accepted.
  • Meier, T.; Förster, A.; Tavassolizadeh, A.; Rott, K.; Meyners, D.; Gröger, R.; Reiss, G.; Quandt, E.; Schimmel, T.; Hölscher, H.: A scanning probe microscope for magnetoresistive cantilevers utilizing a nested scanner design for large-area scans, Beilstein Journal of Nanotechnology, 6 (2015), 451-461.
  • Zamponi, C.; Schürmann, U.; Jurgeleit, T.; Kienle, L.; Quandt, E.: Microstructures of magnetron sputtered Fe-Au thin films, Int. J.Mater.Res, 106 (2015), 103-107.

Zum Seitenanfang

2014

  • Hrkac, V.; Lage, E.; Koppel, G.; Strobel, J.; McCord, J.; Quandt, E.; Meyners, D.; Kienle, L.: Amorphous FeCoSiB for exchange bias coupled and decoupled magnetoelectric multilayer systems: Real-structure and magnetic properties Appl. Phys. Lett., 116 (2014), 134302.
  • Urs, NO.; Teliban, I.; Piorra, A.; Knöchel, R.; Quandt, E.; McCord, J.: Origin of hysteretic magnetoelastic behavior in magnetoelectric 2-2 composites, Appl. Phys. Lett., 105 (2014), 202406.
  • Loger, K.; Lima de Miranda, R.; Engel, A.; Marczynski-Bühlow, M.; Lutter, G.; E. Quandt: Fabrication and evaluation of Nitinol thin film heart valves, Cardiovasc. Eng. Technol., 5 (2014), 308 – 316.
  • Ossmer H.; Lambrecht F.; Gültig M.; Chluba C.; Quandt E.; Kohl M.: Evolution of temperature profiles in TiNi films for elastocaloric cooling, Acta Materialia, 81 (2014), 9-20.
  • Krasimir, A.; Galetz, M.C.; Schmidt,, G.; Depentori, F.; Schütze, M.; Teliban, J.; Quandt, E.: Protective high temperature coatings with intrinsic depletion sensor, Suface & Coatings Technology, 245 (2014), 117-124.
  • Siekmeyer, G.; Schüßler, A.; Lima de Miranda, R. and Quandt, E.: Comparison of the fatigue performance of commercially produced nitinol samples versus sputter-deposited nitinol, JMEPEG, 23 (2014), 2437-2445.
  • Lage, E.; Urs, N.O.; Röbisch, V.; Teliban, I.; Knöchel, R.; Meyners, D.; McCord, J. and Quandt, E.: Magnetic domain control and voltage response of exchange biased magnetoelectric composites, Appl. Phys. Lett., 104, (2014), 132405.
  • Schlüter, K.; Shi, Z.; Zamponi, C.; Cao, F.; Quandt, E.; Atrens, A.: Corrosion performance and mechanical properties of sputter-deposited MgY and MgGd alloys, Corrosion Science 78 (2014), 43-54.

Zum Seitenanfang

2013

  • Ossmer, H.; Chluba, C.; Krevet, B.; Quandt, E.; Rohde, M.; Kohl, M.: Elastocaloric cooling using shape memory alloy films, J. Phys. 476 (2013), 012138.
  • Hrkac, S.B.; Abes, M.; Koops, T.; Krywka, C.; Müller, M.; Kaps, S.; Adelung, R.; McCord, J.; Lage, E.; Quandt, E., Magnussen, O.M.; Murphy, B. M.: Local magnetization and strain in single magnetoelectric microrod composites, Appl. Phys. Lett., 103 (2013), 142410.
  • Hofe v., T., Urs, N. O., Mozooni, B., Jansen, T., Kirchhof, C., Bürgler, D., Quandt, E., McCord, J.: Dual wavelength magneto-optical imaging of magnetic thin films, Appl. Phys. Lett., 103 (2013), 142410.
  • Piorra, A.; Jahns, R.; Teliban, I.; Gugat, J. L.; Gerken, M.; Knöchel, R. and Quandt, E.: Magnetoelectric Thin Film Composites with Interdigital Electrodes, Appl. Phys. Lett., 103 (2013), 032902.
  • Krüger, K.; Thede, C.; Seemann, K.; Leiste, H.; Stüber, M.; Quandt, E.: Thermal stability of the ferromagnetic in-plan uniaxial anisotropy of Fe-Co-Hf-N/Ti-N multilayer films for high-frequency sensor applications, IEEE Transactions on Magnetics 49 (2013), 7.2
  • Jahns, R.; Piorra, A.; Lage, E.; Kirchhof, C.; Meyners, D.; Gugat, J.; Krantz, M.; Gerken, M.; Knöchel, R. and Quandt, E.:Giant magnetoelectric effect in thin film composites, Journal of the American Ceramic Society 96 (2013), 1673-1681.
  • Abes, M.; Koops, C. T.; Hrkac, S. B.; Quandt, E.; Bouchenoire, S. B.; Murphy, B. M.; Magnussen, O. M.: Direct measurements of field-induced strain in magnetoelectric composites by X-ray diffraction studies of forbidden reflections, J. Appl. Phys. 113 (2013), 124303.
  • McCord,J.; Erkartal, B.; von Hofe, T.; Kienle, L., Quandt, E.; Roshchupkina, O.; Grenzer, J.: Revisiting magnetic stripe domains — anisotropy gradient and stripe asymmetry, J. Appl. Phys. 113 (2013), 073903.
  • Lage, E.; Woltering, F.; Quandt, E.; Meyners, D.: Exchange biased magnetoelectric composites for vector field magnetometers, J. Appl. Phys. 113 (2013), 17C725.
  • Helou, M.; Reisbeck, M.; , Tedde, S.F.; Richter, L.; Bär, L.; Bosch, J.; Stauber R.H.; Quandt, E.; Hayden, O.:Time-of-flight magnetic flow cytometry in whole blood with integrated sample preparation, Lab on a chip 13 (2013), 989–1184.
  • Kirchhof, C.; Krantz, M; Teliban, J.; Jahns, R.; Marauska, S. Wagner, B.; Knöchel, R.; Gerken, M.; Meyners, D.; Quandt, E.: Giant magnetoelectric effect in vacuum, Appl. Phys. Lett. 102, (2013), 232905.
  • Tavassolizadeh, A.; Meier, T.; Rott, K.; Reiss, G.; Quandt, E.; Hölscher, H.; Meyners, D.: Self-sensing atomic force microscopy cantilevers based on tunnel magnetoresistance sensors, Appl. Phys. Lett. 102, (2013), 153104.
  • Lima de Miranda, R.; Zamponi, C.; Quandt, E.: Micropatterned Freestanding Superelastic TiNi Films, Advanced Engineering Materials 15 (2013), No. 1—2, 66- 69.
  • Abes, M.; Koops, C. T.; Hrkac, S.B.; Greve, H.; Quandt, E.; Collins, S.P.; Murphy, B.; Magnussen, O.M.: Direct Measurements of Field-induced Strain at Magnetoelectric Interfaces by Grazing Incidence X-ray Diffraction, Appl. Phys. Lett. 102 (2013), 011601.
  • Marauska, S.; Jahns, R.; Kirchhof, C.; Claus, M.; Quandt, E.; Knöchel, R.; Wagner, B.: Highly sensitive wafer-level packaged MEMS magnetic field sensor based on magnetoelectric composites, Sensors & Actuators: A. Physical 189C (2013), 321- 327.
  • Schlüter, K.; Zamponi, C.; Hapke, J.; Hort, N.; Kainer, K.-U.; Quandt, E.: Mechanical properties and corrosion behavior of freestanding, precipitate-free magnesium WE43 thin films, Int. J. Mat. Res. 103 (2013), 286-292.

Zum Seitenanfang

2012

  • Bechtold, C.; Chluba C.; Lima de Miranda, R.; Quandt, E.: High cyclic stability of the elastocaloric effect in sputtered TiNiCu shape memory films, Applied Physics Letters 101 (9) (2012), 091903.
  • Bechtold, C.; Lotnyk, A.; Erkartal, B.; Kienle, L. and Quandt, E.: Structural Characterization of Sputtered Fe70Pd30 Thin Films During Ex Situ and In Situ TEM Heating, Advanced Engineering Materials 14 (8) (2012), 716-723.
  • Habijan, T.; de Miranda, R.L.; Zamponi, C.; Quandt, E.; Greulich, C.; Schildhauer, T.A.; Köller, M.: The biocompatibility and mechanical properties of cylindrical NiTi thin films produced by magnetron sputtering, Material Science & Engineering C-Materials 32 (8), (2012), 2523-2528.
  • Kulkarni, A.; Henkel, B.; Bechtold, C.; Zaporojtchenko,V.;Strunskus, T.; Quandt, E.; Faupel, F.: Monitoring magnetostriction by a quantum tunnelling strain sensor,.Sensors and Actuators A: Physical, 183 (2012), 28-33.
  • Jahns, R.; Greve H.; Woltermann, E.; Quandt, E.; Knöchel, R.: Sensitivity enhancement of magnetoelectric sensors through frequency-conversion, Sensors and Actuators A: Physical, 183 (2012), 16-21.
  • Schlüter, K.; Zamponi, C; Hort, N.; Kainer, K.U.; Quandt, E.: Polycrystalline and amorphous MgZnCa thin films, Corrosion Science 63 (2012), 234-238.
  • Marauska, St.; Jahns, R.; Greve, H.; Quandt, E.; Knöchel, R., Wagner, B.: MEMS magnetic field sensor based on magnetoelectric composites, J. Microchem. Microeng. 22 (6) (2012), 065024.
  • Lage, E.; Kirchhof, C.; Hrkac, V.; Kienle, L.; Jahns, R.; Knöchel, R.; Quandt, E. und Meyners, D.: Exchange biasing of magnetoelectric composites, Nature Materials11 (6) (2012), 523-529.
  • Thede C.; Chemnitz, S.; Teliban, I.; Bechtold, C.; Klever, C.; Stüber, M.; Quandt, E.: Non-contact temperature determination of embedded magnetic phases of hard coatings by exploitation of the magnetic hysteresis, Sensors and Actuators A 178 (2012), 104-109.
  • Fähler, S.; Rößler, U. K.; Kastner, O.; Eckert, J.; Eggeler, E.; Emmerich, H.; Entel, P.; Müller, St.; Quandt, E.; Albe, K.; Caloric effects in ferroic materials: New concepts for cooling, Advanced Engineering Materials 14 (1-2) (2012), 10-19.
  • Teliban, J.; Chemnitz, St.; Thede, C.; Bechtold, C.; Moozoni, B.; Krause H. - J.; Quandt, E.: M(H) shape reconstruction using magnetic spectroscopy, J. Magn. Magn. Mat. 324 (6), (2012), 895-902.

Zum Seitenanfang

2011

  • Gojdka, B.; Jahns, R.; Meurisch, K.; Greve, H.; Adelung, R.; Quandt, E., Knöchel, R. and Faupel, F.: Fully integrable magnetic field sensor based on delta-E effect, Appl. Phys. Lett. 99 (2011), 223502.
  • Naggert, H.; Bannwarth, A.; Chemnitz, St.; Hofe von, T.; Quandt, E. and Tuczek, F.: First observation of light-induced spin change in vacuum deposited thin films of iron spin crossover complexes, Dalton Trans. 40 (2011), 6364.
  • Aleksandrov, K.; Schütze, M.; Teliban, J.; Thede, C.; Quandt, E.: Depletion sensor for protective high temperature, Materials and Corrosion 62 (7) (2011), 706-712.
  • Schlüter, K.; Reverey, J.; Hort, N.; Zamponi, C; Quandt, E.: Mechanical behaviour and corrosion performance of thin film magnesium WE alloys, Materials Science Forum 690 (2011), 286-289.
  • Piorra, A.; Petraru, A., Kohlstedt, H.; Wuttig, M. and Quandt, E.: Piezoelectric properties of 0.5(Ba0.7Ca0.3TiO3) - 0.5[Ba(Zr0.2Ti0.8)O3] ferroelectric lead-free laser deposited thin film, J. Appl. Phys. 109 (2011) , 104101.
  • Kahleyss, F.; Lima de Miranda, R.; Surmann, T.; Zamponi, C.; Machai, C.; Biermann, D.; Quandt, E.: Processing and Damping Properties of Sputtered NiTi Thin Films for Tools in Machining Processes, JMEPEG 20 (4-5) (2011), 500-505.
  • Kulkarni, A.; Chakravadhanula, V.S.K.; Duppel V.; Meyners, D.; Zaporojtchenko, V.; Strunskus, T.; Kienle, L.; Quandt, E. and Faupel, F.: Morphological and magnetic properties of TiO2 / Fe50Co50 composit films, Journal of Materials Science 46 (13) (2011), 4638-4645.
  • Jahns, R.; Greve, H.; Woltermann, E.; Quandt, E.; Knöchel; R. H.: Noise Performance of Magnetometers with Resonant Thin Film Magnetoelectric Sensors, IEEE Transactions on Instrumentation & Measurement 60 (8) (2011), 2995-3001.

Zum Seitenanfang

2010

  • Schlüter, K., Zamponi, C., Piorra, A. and Quandt, E.: Comparison of the corrosion behaviour of bulk and thin film magnesium alloys, Corrosion Science 52 (2010), 3973-3977.
  • Greve, H.; Woltermann, E.; Jahns, R.; Marauska, St.; Wagner, B.; Wuttig, M.; Knöchel, R. and Quandt, E. : Low damping resonant magnetoelectric sensors , Appl. Phys. Letters 97 (2010), 3497277 1/3.
  • Hamman, S., Gruner, M.E., Irsen. S., Buschbeck, J., Bechtold, C., Kock, I., Mayr, S.G., Savan, A., Thienhaus S., Quandt, E., Fähler, S., Entel, P. and Ludwig, A.: The ferromagnetic shape memory system Fe-Pd-Cu, Acta Materialia 58 (2010), 5949-5961.
  • Bechtold C., Buschbeck, J. Lotnyk, A., Erkartal, B., Hamann, S., Zamponi, C., Schultz, L., Ludwig, A., Kienle, L., Fähler S.; Quandt, E.: Artificial Single Variant Martensite in Freestanding Fe70Pd30 Films Obtained by Coherent Epitaxial Growth, Advanced Materials 22 (2010), 2668-2671.
  • Greve, H., Woltermann, E., Quenzer, H.J., Wagner, B.; Quandt, E.: Giant Magnetoelectric Coefficients in (Fe90Co10)(78)Si12B10-AIN Thin Film Composites, Appl. Phys. Lett. 96 (2010), 182501.
  • Bechtold, C., Teliban, J., Thede, C., Chemnitz, S., Quandt, E.: Non-contact Strain Measurements based on Inverse Magnetostriction, Sensors and Actuators A-Physical 158 (2010), 224-230.

Zum Seitenanfang

2009

  • Teliban, I.; Thede, C.; Chemnitz, S.; Bechtold, C.; Quadakkers, W. J.; Schütze, M.; Quandt, E.: Magnetic Moment Investigation by Frequency Mixing Techniques, Rev. Sci. Instrum. 80 (2009), 115106.
  • Schürmann, U.; Gerber, A.; Kulkarni, A.; Hettstedt, F.; Zaporojtchenko, V.; Knöchel, R.; Faupel, F.; Quandt, E.: Fabrication of Toroidal Microinductors for RF Applications, IEEE Transactions of Magnetics 45 (2009), 4770.
  • Klever, C.; Stüber, M.; Leiste, H.; Nold, E.; Seemann, K.; Ulrich, S.; Brunken, H.; Ludwig, A.; Thede, C.; Quandt, E.: Multifunctional FeCo/TiN multilayer thin films with combined magnetic and protective properties. Adv. Eng. Mat. (2009), online available: DOI: 10.1002/adem.200900214.
  • Gronewold, T. M. A.; Baumgartner, A.; Hierer, J.; Sierra, S.; Blind, M.; Schäfer, F.; Blümer, J.; Tillmann, T.; Kiwitz, A.; Kaiser, R.; Zabe-Kühn, M.; Quandt, E.; Famulok, M.: Kinetic Binding Analysis of Apatmers Targeting HIV-1 Proteins by a Combination of a Microbalance Array and Mass Spectrometry (MAMS), J. Prot. Res. 8 (7), (2009), 3568.
  • Lima de Miranda, R.; Zamponi, C.; Quandt, E.: Fabrication of TiNi thin film stents, Smart Mater. Struct. 18 (2009) 104010.
  • Martin, N.; McCord, J.; Gerber. A.; Strache, T.; Gemming, T.; Mönch, I.; Farag, N.; Schäfer, R.; Fassbender, J.; Quandt, E.; Schultz, L.: Local stress engineering of magnetic anisotropy in soft magnetic thin films, Appl. Phys. Lett. 94 (2009) 062506.
  • McCord, J.; Mönch, I.; Fassbender, J.; Gerber, A.; Quandt, E. : Local setting of magnetic anisotropy in amorphous films by Co ion implantation, J. Phys. D.: Appl. Phys. 42 (2009) 055006
  • Lima de Miranda, R.; Zamponi, C.; Quandt, E.: Rotational UV lithography device for cylindrical substrate exposure, Review of Scientific Instruments 80 (2009) 015103
  • Meyners, D.; Von Hofe, T.; Vieth, M.; Rührig, M.; Schmitt, S.; Quandt, E.: Pressure Sensor based on Magnetic Tunnal Junctions; J. Appl. phys. 105 (2009), 07C914
  • Quandt, E.; Zamponi, C.: Superelastic NiTi thin films for medical application. Adv. Sci. Techn. 59 (229) 190

Zum Seitenanfang

2008

  • Faupel, F.; Zaporojtschenko, V.; Strunskus, T.; Greve, H.; Schürmann, U.; Takele, H.; Hanisch, C; Chakravadhanula, V.S.K.; Ni, N.; Gerber, A.; Quandt, E.; Podschun, R.: Functional Polymer Nanocomposites, Polymer & Polymer Composites 16 (8) (2008) 471-482
  • Bechtold, C.; Gerber, A.; Wuttig, M.; Quandt, E .; Magnetoelastic hysteresis in 5 M NiMnGa single crystals, Scripta Materialia 58 (2008), 1022-1024
  • Treitz, G.; Gronewold, T.M.A.; Quandt, E. ; Zabe-Kühn, M.; Combination of a SAW-biosensor with MALDI mass spectrometric analysis, Biosensors and Bioelectronics 23 (2008) 1496-1502
  • Zamponi, C.; Rumpf, H.; Schmutz, C.; Quandt, E. ; Structuring of sputtered superelastic NiTi thin films by photolithography and etching, Materials Science and Engineering: A 481-482 (2008), 623-625.
  • Meyners, D.; von Hofe, T.; Vieth, M.; Rührig, M.; Schmitt, S.; Quandt, E. ; Pressure Sensor based on Magnetic Tunnel Junctions; J. Appl. Phys. (2008), accepted.
  • Lima de Miranda, R.; Zamponi, C.; Quandt, E.; Rotational UV lithography device for cylindrical substrate exposure, Review of Scientific Instruments (2008), accepted.

Zum Seitenanfang

2007

  • Faupel, F.; Zaporojtchenko, V.; Greve, H.; Schürmann, U.; Chakravadhanula, V.S.K.; Hanisch, Ch.; Kulkarni, A.; Gerber, A. ; Quandt, E. ; Podschun, R.: Deposition of Nanocomposites by Plasmas, Contrib. Plasma Phys. 47 (2007), 535-542
  • Hattrick-Simpers, J.R.; Dai L.; Wuttig, M.; Takeuchi, I. , Quandt, E. : Demonstration of magnetoelectric scanning probe microscopy, Rev. Sci. Instr. 78 (2007) 106103
  • Wilson, SA; Jourdain, RPJ; Zhang, Q; Dorey, RA; Bowen, CR; Willander, M; Wahab, QU; Willander, M; Safaa, MAH; Nur, O; Quandt, E ; Johansson, C; Pagounis, E; Kohl, M; Matovic, J; Samel, B; van der Wijngaart, W; Jager, EWH; Carlsson, D; Djinovic, Z; Wegener, M; Moldovan, C; Iosub, R; Abad, E; Wendlandt, M; Rusu, C; Persson, K; New materials for micro-scale sensors and actuators An engineering review, Materials Science and Engineering R-Reports  56 (2007) , 1-129    
  • Löhndorf, M.; Dokupil, S.; Bootsmann, M.-T.; Malavé, A.; Rührig, M.; Bär, L.; Quandt, E. : Characterization of magnetostrictive TMR pressure sensors by MOKE, Journal of Magnetism and Magnetic Materials 316 (2007), e223-e225
  • Jung, A.; Gronewold, T.M.A.; Tewes, M.; Quandt, E. ; Berlin , P.: Biofunctional structural design of SAW sensor surfaces in a microfluidic sensor system, Sensors and Actuators B 124 (2007), 46-52
  • Gronewold, T.M.A.; Schlecht, U.; Quandt, E. : Analysis of proteolytic degradation of acrude protein mixture using a surface wave sensor, Biosensors and Bioelectronics 22 (2007), 2360-2365
  • Gerber, A.; Schmutz, C.; McCord, J.; Quandt, E. : Permeability and Magnetic Properties of Ferromagnetic NiFe(Py)/FeCoBSi bi-Layers for High Frequency Applications, IEEE Transactions of Magnetics 43 (2007), 2624-2626
  • Zamponi, C.; Wuttig, M.; Quandt, E. ; Ni-Ti-Ag shape memory thin films,  Scripta Materialia 56 (2007), 1075 - 1077

Zum Seitenanfang

2006

  • Greve, H.; Pochstein, C.; Takele, H.; Zaporojtchenko, V.; Faupel, F.; Gerber, A.; Frommberger, M.; Quandt, E. : Nanostructured magnetic Fe-Ni-Co/Teflon multilayers for high-frequency applications in the gigahertz range, Appl. Phys. Lett. 89 (2006), 242501-3
  • Rumpf, H.; Walther, T.; Zamponi, C.; Quandt, E. : High ultimate tensile stress in nano-grained superelastic NiTi thin films. Mat. Sci. Eng. A 415 (2006), 304-308
  • Rumpf, H.; Craciunescu, C.; Modrow, H.; Olimov Kh. ; Quandt, E. ; Wuttig, M.: Successive Occurrence of Ferromagnetic and Shape Memory Properties during Crystallization of NiMnGa Freestanding Films. JMMM 302 (2006), 421-428
  • Gronewold, T.; Baumgartner, A.; Quandt, E. ; Famulok, M.: Discrimination of single mutation in cancer gene fragments with an SAW sensor, Anal. Chem. 78 (2006), 4865-4871
  • Rumpf, H.; Wipperfürth, V.; Zamponi, C.; Quandt, E. : Near Net-Shape Fabrication of superelastic NiTi Devices by Sputtering and Photoetching, Mat. Trans. 47 (2006), 523-526
  • Perpeet, M.; Glass, S.; Gronewold, T.; Kiwitz, A.; Malavé, A.; Stoyanov, I.; Tewes, M.; Quandt, E. : SAW sensor system for marker-free molecular interaction analysis, Anal. Lett. 39 (2006) 1747-1757
  • Walther, T., Quandt, E. , Stegmann, H.; Thesen, A.; Benner, G.: First experimental test of a new monochromated and aberration corrected 200kV field-emission scanning transmission electron microscope, Ultramicroscopy 106 (2006), 963-969

Zum Seitenanfang

2005

  • Chopra, H.D.; Sullivan, M.R.; Ludwig, A.; Quandt, E. : Magnetoelastic and magnetostatic interactions in exchange-spring multilayers. Phys. Rev. B 72 (5), (2005), Art.-No. 054415
  • Frommberger, M.; Glasmachers, S.; Schmutz, C.; McCord, J.; Quandt, E. : Microscopic magnetic and high frequency properties of a stress sensor using FeCoBSi magnetostrictive thin films, IEEE Trans. Magn. 41 (2005), 3691-3693.
  • Quandt, E. ; Stein, S.; Wuttig, M.: Magnetic Vector Field Sensor Using Magnetoelectric Thin Film Composites. IEEE Trans. Magn. 41 (2005), 3667-3669.
  • Bootsmann, M.-T.; Dokupil, S.; Quandt, E. ; Ivanov, T.; Abedinov, N.; Löhndorf, M.: Switching of Magnetostrictive Micro-Dot Arrays by Mechanical Strain. IEEE Trans. Magn. 41 (2005), 3505-3507.
  • Frommberger, M.; Schmutz, C.; Tewes, M.; McCord, J.; Hartung, W.; Losehand, R.; Quandt, E. : Integration of Crossed Anisotropy Magnetic Core Into Toroidal Thin-Film Inductors. IEEE Trans. Microw. Theory Tech. 53 (6) (2005), 2096-2100.
  • McCord, J.; Gemming, T.; Schultz, L.; Fassbender, J.; Liedko, M.O.; Frommberger, M.; Quandt, E. : Magnetic anisotropy patterning of amorphous films by He-ion radiation. Appl. Phys. Lett. 86 (2005), 162502.
  • Stein, S.; Wuttig, M.; Viehland, D.; Quandt, E. : Magnetoelectric Effect in Sputtered Composites. J. Appl. Phys. 97 (2005), 10Q301
  • Stodolka, J.; Nau, D.; Frommberger, M.; Zanke, C.; Giessen, H.; Quandt, E. : Fabrication of two-dimensional hybrid photonic crystals utilizing electron beam lithography. Microelectron. Eng. 78-79 (2005), 442-447.
  • Frommberger, M.; McCord, J.; Quandt, E. : Crossed anisotropy magnetic cores for integrated inductors. J. Magn. Magn. Mater. 290 (2005), 1487-1490.
  • Dokupil, S.; Bootsmann, M.-T.; Stein, S.; Löhndorf, M.; Quandt, E. : Positive/Negative magnetostrictive GMR trilayer systems as strain gauges. J. Magn. Magn. Mater. 290 (2005), 795-799
  • Joseph, S.; Gronewold, T.; Schlensog, M.; Olbrich, C.; Quandt, E. ; Famulok, M.; Schirner, M.: Specific targeting of ultrasound contrast agent (USCA) for diagnostic application: An in vitro feasibility study based on SAW Biosensor. Biosensors and Bioelectronics 20 (2005), 1829-1835
  • Gronewold, T.; Glass, S.; Quandt, E. ; Famulok, M.: Monitoring complex formation in the blood-coagulation cascade using aptamer-coated SAW sensors. Biosensors and Bioelectronics 20 (2005), 2044-2052

Zum Seitenanfang

2004

  • Glasmachers, S.; Frommberger, M.; McCord, J.; Quandt, E. : Influence of strain on the high-frequency magnetic properties of FeCoBSi thin films. Phys. Stat. Sol. (a) 201 (2004), 3319-3324
  • Schlensog, M.; Gronewold, T.; Tewes, M.; Famulok, M.; Quandt, E. : A Love-Wave Biosensor Using Nucleic Acids as Ligands, Sensors and Actuators B 101 (2004), 308-315.
  • Frommberger, M.; McCord, J.; Quandt, E. : High frequency properties of FeCoSiB thin films with crossed anisotropy. IEEE Trans. Magn. 40 (2004), 2703-2705
  • Dokupil, S.; Löhndorf, M.; Wecker, J.; Quandt, E. : Magnetische Messfühler en miniature. Physik Journal, Aug./Sept. 2004, 95-99.
  • Löhndorf, M.; Dokupil, S.; Rührig, M.; Wecker, J.; Quandt, E. : Characterization of magnetic tunnel junctions (MTJ) with magnetostrictive free layer materials, J. Magn. Magn. Mat. 272 (2004), 2023-2024.
  • Quandt, E. ; Frommberger, M.: Magnetostrictive LC Circuit Sensors. Mat. Trans., 45/2 (2004), 244-248.
  • Debray, A.; Ludwig, A.; Bourouina, T.; Asaoka, A.; Tiercelin, N.; Reyne, G.; Oki, T.; Quandt, E. ; Muro, H.; Fujita, H.: Application of a Multilayered Magnetostrictive Film to a Micromachined 2-D Optical Scanner, J. Microelectromechanical Systems 13 (2004), 264-271.
  • Zamponi, C.; Rumpf, H.; Wehner, B.; Frenzel, J.; Quandt, E. : Superelasticity of free-standing NiTi films depending on the oxygen impurity of the used targets. Materialwissenschaft und Werkstofftechnik, 35 (2004), 359-364.
  • Shull, R.D.; Quandt, E. ; Shapiro, A.J.; Glasmachers, S.; Wuttig, M.: Magneto-optic indicator film observations of domain motion in magnetostrictive materials under stress, J. Appl. Phys. 95, (2004) 6948-50.
  • McCord, J.; Schäfer, R.; Frommberger, M.; Glasmachers, S.; Quandt, E. : Stress induced remagnetization in magnetostrictive films. J. Appl. Phys. 95 (2004), 6861-6863.
  • Rumpf, H.; Winzek, B.; Zamponi, Ch.; Siegert, W.; Neuking, K.; Quandt, E. : Sputter deposition of NiTi to investigate the Ti loss rate as a function of composition from cast melted targets, Materials Science and Engineering A 378 (2004), 429-433.
  • Winzek, B.; Schmitz, S.; Rumpf, H.; Sterzl T.; Hassdorf, R.; Thienhaus S.; Feydt J.; Moske, M.; Quandt, E. : Recent developments in shape memory thin film technology, Materials Science and Engineering A 378 (2004), 40-46.

Zum Seitenanfang

2003

  • Frommberger, M.; Tewes, M.; Ludwig, A.; Zanke, C.; Quandt, E. : Stress Sensors based on magnetostrictive thin films, Trans. Magn. Soc. Japan, 3 (2003), 115-117
  • Winzek, B.; Sterzl, T.; Rumpf, H.; Quandt, E. : Composites of different shape memory alloys and polymers for complex actuator motions. Journal de Physique, IV 112 (2003), 1163-1168
  • Frommberger, M.; Ludwig, A.; Sehrbrock, A.; Quandt, E. : High frequency magnetic properties of FeCoBSi/SiO2 and (FeCo/CoB)/SiO2 multilayer thin films. IEEE Trans. Magn., 39/5 (2003), 3166-3168
  • Ludwig, A.; Frommberger, M.; Tewes, M.; Quandt, E. : High frequency magnetoelastic multilayer thin films and applications, IEEE Trans. Magn., 39/5 (2003), 3062-3067
  • Dai, L.Y.; Cullen, J.; Wuttig, M.; Lograsso, T.; Quandt, E. : Magnetism, elasticity, and magnetostriction of FeCoGa alloys. J. Appl. Phys. 93 (2003), 8627 - 8629

Zum Seitenanfang

2002

  • Bourouina, T.; Lebrasseur, E.; Reyne, G.; Debray, A.; Fujita, H.; Ludwig, A.; Quandt, E. ; Muro, H.; Oki, T.; Asaoka, A.: Integration of Two Degree-of-Freedom Magnetostrictive Actuation and Piezoresistive Detection: Application to a Two-Dimensional Optical Scanner, Journal of Microelectromechanical Systems, 11/4 (2002), 355 - 361
  • Ludwig, A.; Quandt, E. : Optimization of the ?E-effect in Thin Films and Multilayers by Magnetic Field Annealing. IEEE Trans. Magn., 38 No 5 (2002), 2829-2831
  • Löhndorf, M.; Duenas-Lockwood, T.; Tewes, M.; Quandt; E., Rührig, R.; Wecker, J.: Highly sensitive strain sensors based on magnetic tunneling junctions (MTJs). Applied Physics Letter, 81 (2002), 313 - 315
  • Löhndorf, M.; Duenas-Lockwood, T.; Ludwig, A.; Rührig, M.; Bürgler, D.; Grünberg, P.; Quandt, E. : Strain sensors based on magnetostrictive GMR/TMR structures. IEEE Trans. Magn., 38 (2002), 2826-2828
  • Duenas, T.; Sehrbrock, A.; Löhndorf, M.; Ludwig, A.; Grünberg, P.; Quandt, E. : Micro-sensor coupling magnetostriction and magnetoresistive phenomena. J. Magn. Magn. Mater. 242-245 (2002), 1132-1135
  • Ludwig, A.; Tewes, M.; Glasmachers, S.; Löhndorf, M.; Quandt, E. : High-frequency magnetoelastic materials for remote-interrogated stress sensors. J. Magn. Magn. Mater., 242-245 (2002), 11

Zum Seitenanfang

until 2001

  • Tewes, M.; Löhndorf, M.; Ludwig, A.; Quandt, E.: Remotely Interrogated Magnetoelastic Sensors. Technisches Messen 6 (2001) 292-297
  • Ludwig, A.; Löhndorf, M.; Tewes, M.; Quandt, E.: Magnetoelastic thin films for high-frequency applications. IEEE Trans Magn. 37 (2001), 2690-2692
  • Kohl, M.; Dittmann, D.; Quandt, E.; Winzek, B.: Thin film shape memeory microvalves with adjustable operation temperature. Sensors and Actuators A 83 (2000) 214-219
  • Quandt, E, Ludwig, A.: Magnetostrictive actuation in Microsystems. Sensors and Actuators A 81 (2000), 275-280.
  • Ludwig, A.; Quandt, E.: Giant magnetostrictive thin films for applications in MEMS. J. Appl. Phys. 87 (2000) 4691-95
  • Kohl, M.; Dittmann, D.; Quandt, E.; Winzek, B.; Miyazaki, S.; Allen, D.M.: Shape Memory Microvalves based on Thin Films or Rolled Sheets. Materials Science and Engineering A 273-275 (1999) 784-788
  • Mencik, J.; Munz, D.; Quandt, E.; Ludwig, A.: Determination of Elastic Modulus of Thin Layers. Z. Metallkd. 90 (1999) 766-773
  • Winzek, B.; Quandt, E.: Shape Memory Ti-Ni-X Films (X = Cu, Pd) under Constraint. Z. Metallkd. 90 (1999) 796-802
  • Mencik, J.; Quandt, E.: Determination of elastic modulus of thin films and small specimens using beam bending methods. J. Mater. Res. 14 (1999) 2152-61
  • Chopra, H.D.; Ludwig, A.; Quandt, E.; Hua, S.Z.; Brown, H.J.; Swartzendruber, L.J.; Wuttig, M.: Magnetic mesostructure of giant magnetostrictive spring magnet type multilayers. J. Appl. Phys. 85 (1999) 6238-40
  • Quandt, E.; Ludwig, A.: Giant Magnetostrictive Multilayers. J. Appl. Phys. 85 (1999) 6232-37
  • Quandt, E.; Holleck, H.: Transducer and Protective PVD-Films for Applications in Microsystem Components, Microsystem Technologies 26 (1998), 49-58.
  • Ludwig, A.; Quandt, E.; Mencik, J.: Giant magnetostriction in TbFe/FeCo multilayers, Materials Science Forum Vols 287-288 (1998), 509-512.
  • Skokan, A.; von Blankenhagen, P.; Quandt, E.; Walter, M.: Microstructural Characterization of Nanocrystalline Thin Films by Grazing Incidence Diffraction: Au and Tb0.3Dy0.7Fe2 (Terfenol-D), Materials Science Forum 278-281 (1998), 460-465
  • Wuttig, M.; Su, Q.; Quandt, E.; Ludwig, A.: Magnetomechanical Instability in FeTb/Fe, FeCo Multilayers, J. Appl. Phys. 83 (1998), 7264-66.
  • Quandt, E.; Ludwig, A.; Lord, D.G.; Faunce, C.A.: Magnetic Properties and Microstructure of Giant Magnetostrictive TbFe/FeCo Multilayers, J. Appl. Phys. 83 (1998), 7267-69.
  • Body, C.; Reyne, G.; Meunier, G.; Quandt, E.; Seemann, K.: Application of magneto-strictive thin films for microdevices, IEEE Trans. Magn. 33 (1997), 2163-2166.
  • Quandt, E.; Ludwig, A.; Mencik, J.; Nold, E.: Giant Magnetostrictive TbFe/Fe Multilayers, Journal of Alloys and Compounds 258 (1997), 133-137.
  • Quandt, E.: Giant magnetostrictive thin film materials and applications, Journal of Alloys and Compounds 258 (1997), 126-132.
  • Mencik, J.; Munz, D.; Weppelmann, E.R.; Quandt, E.; Swain, M.V.: Determination of elastic modulus of thin layers using nanoindentation, Journal of Materials Research 12 (1997), 2475-2484.
  • Quandt, E.; Ludwig, A.; Betz, J.; Mackay, K.; Givord, D.: Giant Magnetostrictive Spring Magnet Type Multilayers, J. Appl. Phys. 81 (1997), 5420-22.
  • Mencik, J.; Quandt, E.; Munz, D.: Elastic modulus of TbDyFe films - a comparison of nanoindentation and bending measurements, Thin Solid Films 287 (1996), 208-213.
  • Quandt, E.; Halene, C.; Holleck, H.; Feit, K.; Kohl, M.; Schloßmacher, P.; Skokan, A.; Skrobanek, K.D.: Sputter Deposition of TiNi, TiNiPd, and TiPd Films Displaying the Two Way Shape Memory Effect, Sensors and Actuators A 53 (1996), 433-439.
  • Kohl, M.; Skrobanek, K.D.; Quandt, E.; Schloßmacher, P.; Schüßler, A.; Allen, D.M.: Development of microactuators based on the shape memory effect, Journal de Physique IV 5 (1995), 1187-1192.
  • Quandt, E.; Seemann, K.: Fabrication and Simulation of Magnetostrictive Thin Film Actuators, Sensors and Actuators A50 (1995), 105-109.
  • Quandt, E.; Holleck, H.: Materials development for thin film actuators, Microsystems Technologies 1 (1995), 178-184.
  • Quandt, E.: Multitarget Sputtering of High Magnetostrictive Tb-Dy-Fe Films, J. Appl. Phys. 75 (1994), 5653-55.
  • Quandt, E.; Gerlach, B.; Seemann, K.: Preparation and Applications of Magnetostrictive Thin Films, J. Appl. Phys. 76 (1994), 7000-02.
  • Weickenmeier, A.; Quandt, E.; Kohl, H.; Rose, H.; Niedrig, H.: Computation and Measurement of Characteristic Energy-Loss Large Angle Convergent Beam Patterns of Molybdenum Selenide, Ultramicroscopy 49 (1993), 210-219.
  • Quandt, E.; la Barré, S.; Niedrig, H.: Direct Parallel Detection of Energy Resolved Large Angle Convergent Beam Patterns. Ultramicroscopy 33/1 (1990) 15-21.
        26-1131

Zum Seitenanfang

 

Search